SLIP LUB - ANTI-SEIZE LUBRICANT / CFC-FREE

The SLIP LUB spray is a mixture of selected raw materials with lubricating, anti-seizing and protective properties.

It uses a micro-dispersant penetrating oil, providing a clean lubrication and freeing up stuck parts. This kind of product leaves no residue. Once the product is applied, it forms a thin lubricant film, which provides long-lasting protection. 

Its innovative combination quickly releases: nuts, bolts and locked metal-mechanisms, while lubricating and protecting against rust and corrosion.

It does not attack plastics, metals or rubbers. This product is ideal for use on industrial, households, automobiles and sports equipments.

APPLICATION

• Bolts, nuts, padlocks, locks and hinges;
• Cars, motorcycles, firearms, reel, gearbox, chains and cables of bicycles, outboard motors, etc.;
• Gearing, bearing and straps;
• Eliminates squealing noises and easily frees up stuck parts;
• Water-repellent protector for general equipments and tools.

PACKAGING

• 300ml / 7 oz. Aerosol can

SLIP SPRAY - CONTACT CLEANER

The Slip Contact Cleaner combines a cleaning solvent and a nonflammable propellant.

It is a blend of solvents and cleaning agents that works effectively. The Contact Cleaner can be used on electronic boards, microchips and other electronic equipments. This product promotes a dry cleaning and leaves no moisture or oil residues after its application on equipments using electricity.

PACKAGING

• 200ml / 7 oz. Aerosol can

SLIP SPRAY – GRIPHITE

This product is a dry lubricant, especially developed for applications where oils and grease moisture must be avoided. It works as a friction reducer.

APPLICATIONS

• On sliding rear power windows of cars;
• All types of locks and latches, specially during the rainy season, when these devices often get stuck, etc.

PACKAGING

• 200ml / 4 oz. Aerosol can

SLIP SPRAY - SILICONE MOLD RELEASE

The Silicone Mold Release works as an effective lubricant and release agent. Its use is ideal during demolding processes of plastics, rubbers, resins, ABS, thermoplastic molds, metals, electronics and metal-mechanics. This is a water-repellent product that provides good thermal stability. Once the product is applied, it forms a thin lubricant film, which provides long-lasting protection.

APPLICATIONS

• Mold release in many injection processes of plastic parts;
• Electronic and precision mechanisms in general;
• Anti-rusting and lubricant for rubber and plastic parts.

PACKAGING

• 400ml/ 8 oz. Aerosol can

SLIP SPRAY - SILICONE-FREE MOLD RELEASE

The silicone-free mold release is used in the injection of plastic, rubber, bakelite and other processes where a silicone-free release agent is needed. This product allows parts to be painted, adhesive bound and otherwise in most applications.

High performance and 100% silicone-free molding release agent.

APPLICATIONS

• Plastic injection for subsequent finishing
• Silkscreen
• Painting;
• Gluing process;
• Glass sealing;
• Many other uses where a silicone film must be avoided.

PACKAGING

• 400ml / 8 oz. Aerosol can

SLIP SPRAY - NON-SILICONE PAINTABLE MOLD RELEASE

This product is used in the injection of plastic, rubber, bakelite and other processes where a silicone-free release agent is needed.

It is ideal for demolding parts during processes of injection, blowing and melting of thermoplastics, rubbers and other special polymer materials, where silicone must be avoided. Paintable release agents allow parts to be painted, adhesive bound and otherwise in most applications.

APPLICATION

• In demolding process in order to avoid damaging surfaces when applying adhesives, paintings, finishing processes, etc.
•  

PACKAGING

• 400ml / 9 oz. Aerosol can

SLIP SPRAY - MOLD PROTECTOR

The Mold Protector provides maximum protection against rust and oxidation of molds, dies and metal materials in general. The protection is ensured due to a long-lasting waxy film of excellent anti-corrosion power.

No solvent is necessary for cleaning up surfaces after its application. The protection disappears by itself. It does not stain parts because it is colorless.

APPLICATIONS

• Molds;
• General tools; protecting molds and parts with steel and cast iron finishings, etc.
• Steel sheets, tubes, profiles, stamped parts;
• Machinery and equipments exposed to weather conditions.

PACKAGING

• 400ml / 9 oz. Aerosol can

SLIP SPRAY - SILICON ANTISPATTER

APPLICATIONS

• Torch Nozzles, parts, templates, contact points;
• Panels, hinges and accessories.

PACKAGING

• 400ml / 12 oz. Aerosol can
• 300ml / 9 oz. Aerosol can
•  

SLIP SPRAY - NON-SILICONE ANTISPATTER

The Non-Silicone Antispatter is a product developed to prevent welding-spatter adhering to nozzles, parts and accessories surfaces during the welding process. It is a silicone-free product, basically composed of a special concentrated liquid and propellant fluid that does not harm the ozone layer.

APPLICATIONS

• Torch Nozzles, parts, templates, contact points;
• Equipment with panels, hinges and accessories that may receive a finishing work after its application.

PACKAGING

• 400ml / 12 oz. Aerosol can
• 300ml / 9 oz. Aerosol can

SLIP - DEGREASER SPRAY (step 1)

It was developed as a pre-cleaning and preparation product for surfaces where the penetrant liquid will be applied. It is basically composed of a special concentrated liquid and propellant fluid that does not harm the ozone layer.

APPLICATIONS

• It is used during inspection processes of ferrous materials, non-ferrous materials, cast and forged materials; its use in porous materials must be avoided;
• High density ceramics;
• Glasses;
• Plastics;
• Synthetic plastics;
• Parts and surfaces for NDT (Non-Destructive Testing).

PACKAGING

• 400ml / 9 oz. Aerosol can

HOW TO USE

The most important step in this test is the surface preparation and its pre-cleaning. Below are the main steps of the inspection process:

• Pre-cleaning;
• Application of liquid penetrant;
• Penetration time;
• Excess penetrant removal;
• Drying process;
• Application of developer;
• Development time;
• Inspection.

SLIP - DEGREASER SPRAY (step 2)

This is a surface defects detector made of three different components (remover, dye and developer). Its three components facilitate the identification of defects on solid surfaces, such as cracks, fatigues, etc.

APPLICATIONS

• It can be used during inspection processes of ferrous materials, non-ferrous materials, cast and forged materials; its use in porous materials must be avoided;
• High density ceramics;
• Glasses;
• Plastics;
• Synthetic plastics;
• Parts and surfaces for NDT (Non-Destructive Testing).

PACKAGING

• 400 ml / 9 oz. Aerosol can

HOW TO USE

The most important step in this test is the surface preparation and its pre-cleaning. Below are the main steps of the inspection process:

• Pre-cleaning;
• Application of liquid penetrant
• Penetration time;
• Excess penetrant removal;
• Drying process;
• Application of developer;
• Development time;
• Inspection.

SLIP - DEGREASER SPRAY (step 3)

It must be used after the penetrant application in order to generate a contrast on the inspected surface, thus identifying possible defects, discontinuities, fatigue or cracks.

APPLICATIONS

• It can be used during inspection processes of ferrous materials, non-ferrous materials, cast and forged materials; its use in porous materials must be avoided;
• High density ceramics;
• Glasses;
• Plastics;
• Synthetic plastics;
• Parts and surfaces for NDT (Non-Destructive Testing).

PACKAGING

• 400 ml / 9 oz. Aerosol can

HOW TO USE

The most important step in this test is the surface preparation and its pre-cleaning. Below are the main steps of the inspection process:

• Pre-cleaning;
• Application of liquid penetrant
• Penetration time;
• Excess penetrant removal;
• Drying process;
• Application of developer;
• Development time;
• Inspection.